Repairing Vintage Sony Luggable Calculators

June 10, 2025 by Al Williams No comments

You might wonder why you’d repair a calculator when you can pick up a new one for a buck. [Tech Tangents] though has some old Sony calculators that used Nixie tubes, including one from the 1960s. Two of his recent finds of Sony SOBAX calculators need repair, and we think you’ll agree that restoring these historical calculators is well worth the effort. Does your calculator have a carrying handle? We didn’t think so. Check out the video below to see what that looks like.

The devices don’t even use modern ICs. Inside, there are modules of discrete parts encapsulated in epoxy. There isn’t even RAM inside, but there is a delay line memory, although it is marked “unrepairable.”

There is some interesting history about this line of calculators, and the video covers that. Apparently, the whole line of early calculators grew out of an engineer’s personal project to use transistors that were scrapped because they didn’t meet the specifications for whatever application that used them.

The handle isn’t just cosmetic. You could get an external battery pack if you really wanted a very heavy — about 14 pounds (6.3 kilograms) — and large portable calculator. We are sure the $1,000 retail price tag didn’t include a battery.

These machines are beautiful, and it is fun to see the construction of these old devices. You might think our favorite calculator is based on Star Trek. As much as we do like that, we still think the HP-41C might be the best calculator ever made, even in emulation.

Continue reading “Repairing Vintage Sony Luggable Calculators” →

Nintendo Switch 2 Teardown, Let’s A-Go!

June 9, 2025 by Drew Littrell 11 Comments

A new console challenger has appeared, and it goes by the name Nintendo Switch 2. The company’s latest iteration of the home console portable hybrid initially showed promise by featuring a large 1080p display, though very little official footage of the handheld existed prior to the device’s global release last week. However, thanks to a teardown video from [TronicsFix], we’ve got a little more insight into the hardware.

The technical specifications of this new console have been speculated on for the last handful of years. We now know NVIDIA is again providing the main silicon in the form of a custom 8x ARM Cortex A78C processor. Keeping the system powered is a 5220 mAh lithium ion battery that according to [TronicsFix] is held in with some seriously strong adhesive.

On the plus side for repairability, the onboard microphone and headphone jack are each attached by their own ribbon cable to the motherboard. The magnetic controller interfaces are also modular in design as they may one day prove to be a point of failure from repeated detachment. Speaking of which, [TronicsFix] also took apart the new version of the Joy-Con controller that ships with the system.

Arguably the biggest pain point for owners of the original Nintendo Switch was the reliability of the analog sticks on the diminutive controllers. There were widespread reports of “stick drift” that caused players to lose control as onscreen avatars would lazily move in one direction without player input. For the Switch 2, the Joy-Con controllers feature roughly the same number of dome switch buttons as well as haptic feedback motors. The analog sticks are larger in size on the outside, but feature the same general wiper/resistor design of the original. Many will cry foul of the continued use of conventional analog stick design in favor of hall effect sensors, but only time will tell if the Nintendo Switch 2 will repeat history.

Continue reading “Nintendo Switch 2 Teardown, Let’s A-Go!” →

Soviet Calculator Teardown Reveals Similarities And Differences

June 6, 2025 by Lewin Day 12 Comments

Tearing down hardware from different parts of the world can be revealing, showing unique parts, techniques, and tricks employed by engineers living in a very different world from our own. To that end, [msylvain59] has been kind enough to give us a look inside the Elektronika MK-26—a calculator built in the former Soviet Union.

There’s lots of interesting stuff to see from the get-go. The oddball button pad is covered in Cyrillic symbols, quite alien to those of us more accustomed to the Latin character set. It’s also constructed somewhat unlike more familiar models from Western-aligned companies like Casio or Commodore. It also rattles when shaken, which doesn’t inspire confidence. Inside, it’s got old-school brown PCBs without the usual green solder mask, a chunky IC in a weird package, and display is via a power-hungry VFD.

It doesn’t look so totally alien inside; much of the construction is pretty typical of the mid-1970s, wherever you went around the world. The most striking differences are more in the graphics and visual design than anything else.

Ultimately, there are reasons why manufacturers around the world tend to converge on similar techniques. Generally, it’s because it’s more economical or easier to do things a certain way. And yet, we still see regional variances because conditions, technologies, and parts availability varies around the world. This teardown highlights that quite clearly.

If you’re just getting a taste for Soviet hardware teardowns, you’ll love this video diving inside a real Soyuz clock.

Continue reading “Soviet Calculator Teardown Reveals Similarities And Differences” →

A Vintage ‘Scope Comes Back To Life

June 4, 2025 by Jenny List 3 Comments

We’re suckers for a vintage electronic teardown here at Hackaday, and thus it’s pleasing to see [Thomas Scherrer OZ2CPU] with a 1962 AEG oscilloscope on his bench. It’s definitely seen better days, and is a single-trace 10 MHz unit of the type you might have seen in a typical general purpose electronics lab back in the day.

Pulling the cover off, and as expected there’s a row of tubes each side of the centrally mounted CRT. No printed circuits in sight, and no transistors either, though the rectifiers are selenium parts. After a clean-up it’s time to look at the tubes, and they show the metallic deposits characteristic of long operation. We’re more used to that from older televisions than test equipment,

Gently bringing the power up it looks promising, but there’s a purple glow from one of the PCL82 triode-pentodes. Replacing that and a double-triode results in a ‘scope that surprisingly, is working. It was evidently a high quality device in the first place, with components capable of lasting for over six decades.

We’ve seen more from his bench involving tubes, including this device using a magic-eye tube as the heavy lifter.

Continue reading “A Vintage ‘Scope Comes Back To Life” →

Fault Analysis Of A 120W Anker GaNPrime Charger

May 21, 2025 by Maya Posch 39 Comments

Taking a break from his usual prodding at suspicious AliExpress USB chargers, [DiodeGoneWild] recently had a gander at what used to be a good USB charger.

The Anker 737 USB charger prior to its autopsy. (Credit: DiodeGoneWild, YouTube) — The Anker 737 USB charger prior to its autopsy.

Before it went completely dead, the Anker 737 GaNPrime USB charger which a viewer sent him was capable of up to 120 Watts combined across its two USB-C and one USB-A outputs. Naturally the charger’s enclosure couldn’t be opened non-destructively, and it turned out to have (soft) potting compound filling up the voids, making it a treat to diagnose. Suffice it to say that these devices are not designed to be repaired.

With it being an autopsy, the unit got broken down into the individual PCBs, with a short detected that eventually got traced down to an IC marked ‘SW3536’, which is one of the ICs that communicates with the connected USB device to negotiate the voltage. With the one IC having shorted, it appears that it rendered the entire charger into an expensive paperweight.

Since the charger was already in pieces, the rest of the circuit and its ICs were also analyzed. Here the gallium nitride (GaN) part was found in the Navitas GaNFast NV6136A FET with integrated gate driver, along with an Infineon CoolGaN IGI60F1414A1L integrated power stage. Unfortunately all of the cool technology was rendered useless by one component developing a short, even if it made for a fascinating look inside one of these very chonky USB chargers.

Continue reading “Fault Analysis Of A 120W Anker GaNPrime Charger” →

Not A Sewing Machine: A Multimedia Briefcase

May 15, 2025 by Al Williams 11 Comments

When you think of Singer, you usually think of sewing machines, although if you are a history buff, you might remember they diversified into calculators, flight simulation, and a few other odd businesses for a while. [Techmoan] has an unusual device from Singer that is decidedly not a sewing machine. It is a 1970s-era multimedia briefcase called the Audio Study Mate. This odd beast, as you can see in the video below, was a cassette player that also included a 35mm filmstrip viewer. Multimedia 1970s-style!

The film strip viewer is a bright light and a glass screen with some optics. You have to focus the image, and then a button moves the film one frame. However, that’s for manual mode. However, the tape could encode a signal to automatically advance the frame. That didn’t work right away.

Continue reading “Not A Sewing Machine: A Multimedia Briefcase” →

Inside Starlink’s User Terminal

May 14, 2025 by Al Williams 33 Comments

If you talk about Starlink, you are usually talking about the satellites that orbit the Earth carrying data to and from ground stations. Why not? Space is cool. But there’s another important part of the system: the terminals themselves. Thanks to [DarkNavy], you don’t have to tear one open yourself to see what’s inside.

The terminal consists of two parts: the router and the antenna. In this context, antenna is somewhat of a misnomer, since it is really the RF transceiver and antenna all together. The post looks only at the “antenna” part of the terminal.

Continue reading “Inside Starlink’s User Terminal” →